|
|
Production of Ductile Iron with Feritic Matrix
Blaha, Marek ; Šupálek, Milan (referee) ; Molliková, Eva (advisor)
This bachelor thesis deals with the properties and production of ductile cast iron with ferritic matrix. Theoretical part is focused on basic information about ductile iron, its chemistry, structure and mechanical properties. The production of ductile iron with ferritic matrix in JMA Hodonín Ltd is described in the next chapter of this thesis. In the experimental part the real cast is described together with its production technology and material. The practical part is concentrated on comparison of chemical composition, structure and mechanical properties of material of cast and keel blocks made of the same melt. Finally the results of experiments are summarized and the arrangements for improving conformity between material of cast and of keel block are suggested.
|
|
| |
|
|
Compacted graphite cast iron
Švábenský, Petr ; Kaňa, Václav (referee) ; Laštovica, Jaroslav (advisor)
This labor search to summarize the known properties and methods of production of compacted graphite iron. The first part describes the structure, chemical composition, properties and uses. The second part focuses on the possibility of production of vermicular cast iron. Inoculation options and treatment and various manufacturing processes.
|
|
|
Production of thinwall iron castings
Kryštůfek, Tomáš ; Kaňa, Václav (referee) ; Roučka, Jaromír (advisor)
This diploma thesis is focused on production and problems in production of thin-walled ductile iron castings, especially in the inoculation process. The focus is on the influence of elements on the structure and mechanical properties of ductile iron and as well as the influence of some elements, that are commonly used in inoculation alloys. Furthermore, the factors that affect the production technology are written, i.e., solidification rate, wall thickness, cooling rate, and factors used for affecting the thin-walled castings production, i.e., the use of insulating moulding compounds and increasing the graphite nodule count. At the end of the theoretical part, important production processes are analysed, namely inoculation and spheroidization. The experimental part is focused on influencing the structure and mechanical properties using several types of inoculants of different chemical compositions, whereas the tested thicknesses of the test plates are 3-, 5- and 8-mm. Hardness, tensile strength and ductility are evaluated on these plates. Finally, the volume of ferrite in the structure, shape and size of the graphite nodules were examined.
|
|
|
Design of outdoor multifunctional medical box for vaccination.
Kudlíková, Marie ; Karásek, David (referee) ; Rubínová, Dana (advisor)
This thesis engage in design of outdoor multifunctional madical box for vaccination. It´s a mobile rear specified firstly for humanitarian missions and for resolution of current inconvenient conditions. Its multifunctionality consist in a transport of necessary supply, in a possibility of siting of medics and pacients, in satisfactory stacking area and in possibility of networking. Many things are compact in this project. mobility with sufficiency of space, simplicity with variability, weight with stability as well as shaping with acceptable financial expenses.
|
|
|
Study of the effect of metallurgical and technological parameters on mechanical properties of aluminium alloys
Pešek, Jakub ; Krahula, Karel (referee) ; Zemčík, Ladislav (advisor)
Sugested thesis has been made with the intent to observe and describe the length of the modifying effect of three different types of modifiers and their effect on the mechanical properties of aluminium alloy. Next step was to process and evaluate links between mechanical properties and chemical composition. Chemical analysis and mechanical properties of cast samples were obtained. For this purpose and a method of metallographic processing was applied afterwards. The grain size was evaluated before and after the heat treatment. Measurements of the secondary dendrite branches and evaluation of the eutectic morphology were made. The hardness was measured on selected samples.
|
|
|
Influence of modification and inoculation on structure and mechanical properties of aluminium alloys
Janošťák, Jan ; Lána, Ivo (referee) ; Roučka, Jaromír (advisor)
This thesis examines the influence of inoculation and modification on the internal structure and properties of aluminium-silicon alloys. The effect of inoculation by titanium and boron and modification by sodium and strontium is investigated in experimental part of the thesis. All these metallurgical interventions in the melt are tested on three types of hypoeutectic Al-Si alloys (AlSi10Mg(a), AlSi8Cu3, AlSi7Mg0,3). The experiment was carried out in cooperation with the foundry of non-ferrous metals, Aluminium Group, a.s. in Sloup.
|
|
|
Effect of inoculation and cooling rate on the DAS for aluminium foundry alloys
Dočekal, Václav ; Blažík, Petr (referee) ; Kaňa, Václav (advisor)
This bachelor thesis deals influence of inoculation and rate of cooling on DAS value. The aim of this thesis is primarily the effect of inoculation and formation of dendrites in aluminium alloy. The second part of thesis describe experiment. In this experimental part, is research effect inoculation of combination Ti and B. The influence of the cooling rate on the DAS value, which has been achieved by various casting processes, has also been researched. These effects, was researched on aluminium alloy-AlSi10Mg(a). The DAS has been found to affect the rate of cooling. Inoculation does not affect this value.
|
|
| |
|
|
Structure and mechanical properties of thin wall nodular iron castings
Chýlková, Adéla ; Mores, Antonín (referee) ; Roučka, Jaromír (advisor)
The purpose of this final thesis is experimental verification of the influence of graphitic inoculants containing different amounts of trace elements on the structure, mechanical properties and internal homogeneity of thin-walled ductile iron casting. This thesis describes the issue with casting of thin-walled ductile iron. Two melts of thin-walled test plates with thickenesses of 3-, 5- and 8 mm were done in experimental part. A total of six types of inoculations with different content of trace elements were tested. Subsequently, an X-ray irradiation analysis was performed on the samples and hardness, tensile strength and ductility were evaluated. Futhermore, the amount of graphite in structure, graphite shape, graphite size, nodularity, graphite nodule count and volume phases of ferrite and perlite in matrix were analysed in thin-walled ductile cast iron by computer-based image analyzer. Finally, the measurement data were processed into tables and charts and conclusions were formulated. An X-ray analysis proved, that all thin-walled test plates containned shrinkage porosity. Furthemore it was confirmed, that content of manganese in inoculant increases tensile strength and hardness. Also content of zirconium in inoculant increases graphite nodule count.
|
guest ::
